Epson ELP-3300 - Manual (Page 26)

7
Connecting to a PC desktop computer
Before beginning, turn off the projector and computer if they are on. To access
the connectors on the projector, push open the cover located on the right side
of the projector, under the handle.
1. Disconnect the computer’s monitor cable from the VGA port on the back of
your computer and connect it to the MONITOR connector of the Y-cable.
2. Connect the Y-cable’s VGA connector to the computer’s VGA port.
3. Connect the Y-cable’s LCD connector to the projector’s Computer IN/OUT
port.
4. Tighten the screws for all connectors to make sure they are fastened securely.
VGA connector
VGA port
LCD connector
MONITOR
connector
monitor
cable
S-Video Audio In
L R
Computer In/Out
Computer
1
2
3
Connecting to a Computer