Chap 4-installing and removing drives, Installing and removing drives, Chapter 4 – Epson EL 3S/33 User Manual
Page 60
Chapter 4
Installing and Removing Drives
This chapter describes how to install and remove optional
drives in your computer. You can use these instructions to
install a variety of devices, including hard disk drives, a
diskette drive, a tape drive, or a CD-ROM drive. Although your
drive may look different from the ones illustrated here, you
should be able to install it the same way.
Your computer can hold up to three mass storage devices. You
can install a hard disk drive in the internal hard disk drive bay.
In the upper horizontal bay, you can install a second hard disk
drive (if you have the right cable), a second diskette drive, a
tape drive, or a CD-ROM drive.
To install or remove a drive, first remove the computer’s cover
as described in Chapter 3. Then use the instructions below to
install a hard disk drive in the internal hard disk drive bay or
follow the instructions on page 4-11 to install any type of drive
in the upper horizontal bay.
If you are installing or removing a non-Epson drive, some of
the steps in this chapter may not apply; see the documentation
that came with your drive for more information.
Installing and Removing Drives
4-1