Epson EL 3S/33 - Manual (Page 30)

Note
If you are installing a monochrome monitor, you also need
to set jumper J11 on the main system board to position 2-3.
See Chapter 3 for more information on setting jumpers.
Setting Keyboard Options
Two options in the SETUP program allow you to control
keyboard settings. The Keyboard option allows you to disable
the built-in keyboard connector if you are using an optional
connector.
The NumLock on at boot option determines the initial state
of the num lock function when you turn on or reset your
system. When num lock is off, the keypad controls cursor
movement. If num lock is on, the keypad types numbers.
Select
YES
to set the num lock function on when the system
starts.
Setting the Processor Speed
The CPU Speed option sets the processor speed to fast or
slow. At fast speed, your processor operates at its fastest speed,
33 MHz. At the slow speed setting, the processor operates at
8 MHz to provide compatibility with older application
programs.
Note
The Cyrix cache option is not available on this system.
1-16 Setting Up Your System