Epson EL 3S/33 User Manual
Page 43
1.
2.
3.
4.
5.
6.
7. Set the cover aside.
8. Ground yourself to the computer by touching the metal
surface of the back panel.
Warning
Be sure to ground yourself by touching the back panel of the
computer every time you remove the cover. If you are not
properly grounded, you could generate an electric shock that
could damage a component when you touch it.
When you are ready to replace the computer’s cover, follow
these steps:
Make sure all the internal components are installed
properly.
Check all cable connections, especially those that might have
been loosened during your work.
Make sure all cables are out of the way so they do not catch
on the cover.
Insert the front of the cover between the front bezel and the
chassis of the computer and guide it straight down.
Replace the three cover retaining screws.
Reconnect the computer to the monitor, printer, keyboard,
and any other peripheral devices you have. Then reconnect
the power cable to the back of the computer and to an
electrical outlet.
3-4
Installing and Removing Options