Elmo Network Pan-Tilt-Zoom Camera PTC-201CIP - Manual (Page 42)

- 41 -
about to change the IP address for the administrator.” or other message is displayed.
Confirm the changed IP address for the administrator. If it checks OK, click the [Yes]
button.When the message “The saving of the setup was completed.” is displayed, the
setting of the IP address filtering function is completed. If the message “Incorrect
value of setting exists. Please set up again.” is displayed when the submit button
[SUBMIT] is clicked, there is an incorrect value entered for setting. Go back to the IP
Address Filtering Configuration page and redo the setting.
Reference Page [7] Configurations
IP address filtering Configurations P.43
Note: When updating the IP address for the administrator on the IP Address
Filtering Configuration page, exercise added care in setting. If the IP
address for the administrator cannot be remembered, it is impossible to
go to the Configurations page. In this case, follow the step “Initialization
of the network”.
Reference Page [1] Preparation for connection
Initialization of the network setting P.31