Elmo Network Pan-Tilt-Zoom Camera PTC-201CIP - Manual (Page 40)

- 39 -
• After the selection, click the submit
button [SUBMIT] . If [No action] is
selected, when the message “The
saving of the setup was completed.”
is displayed, the setting of the alarm
function is completed. If [File
transfer] is selected, the File Transfer
Setting Input page is displayed.
• When the File Transfer Setting Input
page is displayed, change the set
values according to the host at the
saving destination. To reset the
changed set values to the original set values, click the clear button [CLEAR] .
• When all items have been set, click the submit button [SUBMIT] . When the message
“The saving of the setup was completed.” is displayed, the setting of file transfer is
completed. If the message “Incorrect value of setting exists. Please set up again.” is
displayed when the submit button [SUBMIT] is clicked, there is an incorrect value
entered for setting. Go back to the File Transfer Setting Input page and redo the
setting.
Reference Page [7] Configurations Alarm Configurations P.43
Reference Page [7] Configurations
File transfer Configurations P.44
Note: Image could not be saved on some network conditions.