Elmo Network Pan-Tilt-Zoom Camera PTC-201CIP - Manual (Page 33)

- 32 -
Display of static images
By clicking the links [VGA] and [QVGA] of CAPTURE at the PTC-201C IP page, and the
LIVE page, the static images of 320
X 240 and 640 X 480 in size can be displayed,
respectively. To save the static image, use the function of the Web browser.
When any link at the PTC-201C IP page is clicked, the static image is displayed in the same
window. However, when any link at LIVE pages is clicked, another window opens, and the
static image is displayed in that window.
Display of moving images (LIVE page)
By clicking the link [QVGA] next to *LIVE
on the “PTC-201C IP” page or the link
[QVGA] next to MONITOR SIZE on the
LIVE page, the QVGA (320X240) moving
live image page can be displayed. Moreover,
by clicking the link [VGA] next to *LIVE or
the link [VGA] next to MONITOR SIZE on
the LIVE page, the VGA (640X480) moving
live image page can be displayed.
However, to display moving images, Java
must have been set enabled.
Moving images can be displayed
simultaneously at up to 10 clients. If more clients access the Camera, the screen displays the
message “Maximum number for LIVE image now accessing. Please wait”
The frame rate of the Moving image is max. 30 frames per second. However, the frame rate
depends on the processing capacity of the host, the network environment, the number of
connections units, etc.
Note: If the power supply to the Camera is turned OFF while the moving image is in
display, the host displaying the moving image may, depending on the Web
browser in use, continue the internal processing even if the Web browser is
closed. Normally, this causes no problem. However, if this is repeated again
and again, the operation of the host may be destabilized. If the host becomes
unstable, restart the host.
Note: When moving images break up for some reason, moving display section in
the browser gets black.