Elmo Network Pan-Tilt-Zoom Camera PTC-201CIP User Manual

Page 35

- 34 -

(1) Zoom operation

Clicking the buttons

effects zoom operation. Clicking the TELE (T-) buttons and the

WIDE (-W) buttons provides zoom-in and zoom-out operation, respectively. The
buttons

or coarse control buttons enable the zoom position to change by a large

amount, and the buttons

or fine control buttons permit the zoom position to

change by a small amount.

(2) Iris operation
By clicking the buttons

, the iris can be adjusted manually. Clicking the OPEN (-O)

buttons opens the iris diaphragm, and clicking the CLOSE (C-) buttons closes the iris
diaphragm. The buttons

or coarse control buttons enable the lens aperture to

change by a large amount, and the buttons

or fine control buttons permit the

lens aperture to change by a small amount. Clicking the AUTO IRIS button
brings the camera into the Auto Iris mode.

(3) Focus operation
By clicking the buttons

, the focus can be adjusted manually. Clicking the NEAR

(N-) buttons and the FAR (-F) buttons shifts the focus toward you and away from you,
respectively. The buttons

or coarse control buttons enable the focus shift to

change by a large amount, and the buttons

or fine control buttons permit the

focus shift to change by a small amount. Clicking the AUTO FOCUS button
brings the camera into the Auto Focus mode.

(4) Move operation
By clicking the 1 to 6 buttons

, the camera can be moved to the registered preset

position assigned to each button.

(5) Operating PAN/TILT
To move the camera while watching the moving image, drag the slider boxes
horizontally and vertically on the scroll bars

and

. When the mouse button is

clicked on some point within the area

, the marker moves to the point on which the

mouse button was clicked, and the camera also moves to the position corresponding that
point. Clicking the RESET button

matches the PAN/TILT position stored in the

camera with the actual position. Clicking the HOME button

orients the camera

frontward.