Installing the nic modules – Lanner FW-8894 User Manual

Page 21

Installing the NIC Modules

FW-8894 series comes with 4 NIC Ethernet module slots

for network bandwidth expansion. Please follow the steps

for installation.

1. Select a NIC Ethernet module slot.

2. Rotate and loosen the two lock-screws of the selected

module slot.

3. Remove the door of the module slot and aim at the

PCIe socket for module insertion.

4. Insert your NIC Ethernet module. (Note: the module

shown in the image below is for reference only).

5. Once the module is firmly seated, rotate and tighten the

two lock-screws.