Lanner FW-8760 - Manual (Page 41)

36
Bios Settings
Chapter 4
Network Application Platforms
PS/2 Mouse Support
It lets you enable or disable support for PS/2 mouse.
Wait for ‘F1’ if error
It determines whether the message, “Press F1 to continue”
should be displayed when error occurs during start-up.
Option Description
Enabled When setting to enabled, the system dis-
plays the message, “Press F1 to continue”
and waits for the input. when error occurs
during start-up.
Disabled When setting to Disabled, the system will
not halt the start-up sequence even when
an error is detected.
Hit ‘DEL’ Message Display
When this item is set to Enabled, the system displays the
message , “Press DEL to run Setup” during the start-up
sequence.
Interrupt 19 Capture
Set this value to allow option ROMs such as network
controllers to trap BIOS interrupt 19.
Option Description
Disabled The BIOS prevents option ROMS from trap-
ping interrupt 19.
Enabled The BIOS allows option ROMs to trap inter-
rupt 19.
Boot Device Priority
Use this screen to specify the order in which the system
checks for the device to boot from. To access this screen,
select Boot Device Priority on the Boot Setup screen and
press . The following screen is displayed at right: