Lanner FW-8760 - Manual (Page 24)

19
Bios Settings
Chapter 4
Network Application Platforms
Advanced Settings
Select the Advanced tab from the setup screen to enter
the Advanced BIOS Setup screen. You can select any of
the items in the left frame of the screen, such as SuperIO
Configuration, to go to the sub menu for that item. You
can display an Advanced BIOS
Setup option by highlighting it using the keys.
All Advanced BIOS Setup options are described in this
section. The Advanced BIOS Setup screen is shown at
the right. The sub menus are described on the following
pages.
IDE Configuration Settings
You can use this screen to select options for the IDE
Configuration Settings. Use the up and down
keys to select an item. Use the and keys to
change the value of the selected option. A description of
the selected item appears on the right side of the screen.
The settings are described on the following pages.
SATA#1 IDE Configuration: These 2 items allow you to select
the ATA/IDE and SATA configuration. Select [Compatible]
,the OS will configure your SATA device as ATA/IDE. Select
[Enhanced], the OS will configure your SATA device as
SATA.
Primary IDE Master, Primary IDE Slave, Secondary IDE Master,
Secondary IDE Slave:
Select one of the hard disk drives to configure it. Press
to access its the sub menu. The options on the
sub menu are described as in the following..