Lanner FW-8760 - Manual (Page 35)

30
Bios Settings
Chapter 4
Network Application Platforms
Hardware Health Configuration
This menu shows the hardware monitor configuration
settings. Select an item then press to display the
configuration options.
Hardware Health Configuration
It allows you to configure the smart fan feature. You can
manually turn on the system fan with the Manual Mode or
set the target system temperature at which the system fan
will start running if the fan is not yet turned on with Thermal
Cruise Mode. And the system fan can also be turned off
automatically if the temperature for the system is at or
below the specified value. Refer to Motherboard Layout on
Chapter 3 Block Diagram for system fan connectors.
Hardware Health Configuration
It allows you to configure the smart fan feature. You
can manually turn on the CPU fan or set the target CPU
temperature at which the CPU fan will start running if the
fan is not yet turned on. And the CPU fan can also be turned
off automatically if the temperature for the CPU is at or
below the specified value. Refer to Motherboard Layout on
Chapter 3 Block Diagram for CPU fan connectors.
Remote Access Settings
You can use this screen to select options for the Remote
Access Configuration. Use the up and down keys
to select an item. Use the and keys to
change the value of the selected option. The settings are
described on the following pages. The screen is shown at
right.