Lanner FW-8760 - Manual (Page 17)

12
Motherboard Information
Chapter 3
Network Application Platforms
Clear CMOS jumper (J6): It is for clearing the CMOS
memory and system setup parameters by erasing the
data stored in the CMOS RAM such as the system
passwords.
M6 CompactFlash Connector (CF1): It is for connecting
a Compact Flash card to be served as your system’s
storage. The connector is a CF Type II slot which could
fit both CF Type I or CF Type II cards.
Jumper Settings
M1 Fan Connectors(FAN1/FAN2/FAN3/FAN4): The 4-pin
connector is for connecting the CPU fans. It comes
with the smart fan feature in which the fans could
be monitored and turned on when the temperature
supersede the set threshold. Connect CPU fans to
FAN2, FAN3 and FAN4, and connect system fan to
FAN1 if there is one.
M2 Fan Connectors(FAN5/FAN6): The 3-pin connector is
for connecting the chassis fan.
PCI-Ex8 Golden Finger(PCIEC1/PCIEC2): It is for
connecting the riser card to add the expansion cards
which might be an Ethernet card or a RAID card.
SPI-ROM Update Connector (SPI-ROM1): Using the
appropriate cable to connect this 10-pin ISP in header
connector, the user can update the SPI Flash soldered
on board.
3
2
1
Function Ground +12V NC
PIN NO. 1 2 3
Pin No. Function
1-2 (Default) Normal
2-3 Clear CMOS
1
2
3
Pin No. 1 2 3 4
Function FAN1 FANOUTOPWM
(not use)
SYSFANIN VFAN1 GROUND
CPUFANIN0 VFAN2
FAN2
FAN3
AUXFANIN0 VFAN3
FAN4 CPUFANIN1 VFAN4
1 2 3 4
M3
Function Pin No.
SPI_ICH_
MOSI_R
10
SPI_ICH_CLK_R 8
SPI_HOLD0_L 6
V_3P3_SPI 4
NC 2
Pin No. Function
9 GND
7 NC
5 SPI_ICH_MISO_R
3 SPI_CS0
1 NC
9
7
5
3
1
10
8
6
4
2
M4
M5
Pin No. Function Pin No. Function
1 Ground 2 Data 3
3 Data 4 4 Data 5
5 Data 6 6 Data 7
7 CE1# 8 N.C.
9 Ground 10 N.C.
11 N.C. 12 N.C.
13 +3.3V 14 N.C.
15 N.C. 16 N.C.
17 N.C. 18 Addr 2
19 Addr 1 20 Addr 0
21 Data 0 22 Data 1
23 Data 2 24 WP
25 CD2- 26 CD1-
27 Data 11 28 Data 12
29 Data 13 30 Data 14
31 Data 15 32 CE2#
33 N.C. 34 IOR#
35 IOW# 36 WE#
37 READY# 38 +3.3V
39 CSEL. 40 N.C.
41 RESET 42 WAIT#
43 NPACK# 44 REG#
45 DASP# 46 DIAG#
47 Data 8 48 Data 9
49 Data 10 50 Ground
25 1
50 26
CF1
1