Lanner LVC-5000(N4) - Manual (Page 10)

10
System Components
Chapter 2
Embedded and Industrial Computing
Rear Components
Component Description Pin Definition Reference
R1 Multiple-I/O Connector A 26-pin male connector for the
following functions:
HD Audio MIC-in/Line-out •
4 Digital-In & 4 Digital-output •
Two Output relay control with •
contact current which support
9~36V@ 2A each
MCU input detection to wake up
•
the system automatically
One serial communication port
•
MIO2 on page 20
R2 HDMI Port (‡) A HDMI port which is provided
by Intel HD graphics (resolution:
1920x1200@75Hz).
HDMI1 on page 19
R3 DVI-D (‡) A DVI-D port (single link) which
is provided by Intel HD Graphic
Engine. This port can support up to
1920x1200@75Hz resolution.
DVID1 on page 19
R4 VGA Port (‡) It connects an external VGA
monitor or projector (resolution:
2048x1536@60Hz)
VGAA1 on page 19
R5 12V DC Power Output 1x 2-pin terminal block for DC 12V (1A)
Output
CN5 on page 22
R6 Power-In (DC) Power-in with ignition support. The
LVC-5000 support a wide range of
power input +9~+36V including the
prevalent 12V and 24V vehicular power
system. It has a 2KV ESD protection on
the DC input and ignition line.
PRJK1 on page 21
R7 Serial Ports (from left to right:
COM1/COM2)
COM1 supports only RS232
communication protocol while
COM2 provides RS232/RS422/RS485
communication protocols with a dip
switch selecting among these types.
COM1 RS-232 (COMB1)/COM2
RS-232/422/485 (COMB2) Port
on page 16
R8 Reserved for future
expansion
* LED behavior depends on module specifications
† Only on model LVC-5000N4 and LVC-5000N4-7A
‡ Dual display function supports independent, clone, and extended mode for DVI-D+VGA or HDMI+VGA
R1
COM1 COM2
R2 R3 R4 R5 R6
R7
R8