KACO Powador-gridsave - Manual (Page 5)

General Information
Operating instructions Powador-gridsave_EN Page 5
1.1.5 Instructions symbols guide
Instructions
↻ Prerequisite for the step
1. Carry out step.
2. (Additional steps, if applicable)
» Results of the step
1.2 Name plate
The name plate is located on the inside of the cabinet door.
1.3 Additional information
NOTE
The battery system uses lithium-based batteries.
Please check whether your insurance includes conditions for installation and operation of lithium
batteries. The retro-fitting of fire or smoke alarms may be necessary.
NOTE
The EU Declaration of Conformity can be found in the appendix.
For information on grid coupling, grid protection and safety parameters, along with more detailed
instructions, go to our web site: http://kaco-newenergy.com/de
1.4 Intended use
The device is built according to the latest technological standards and safety regulations. Nevertheless, improper
use may cause lethal hazards for the operator or third parties, or may result
in damage to the device and other property.
Operate the device only with a permanent connection to the public power grid.
Any other or additional use of the device is deemed improper. This includes:
• Mobile use
• Use in potentially explosive atmospheres
• Use in rooms where the humidity is higher than 95%
• Operation outside of the specifications intended by the manufacturer