KACO Powador-gridsave - Manual (Page 36)

Disposal
Page 36 Operating instructions Powador-gridsave_EN
11.2 Uninstalling the device
NOTE
To uninstall, follow the same sequence as for installation but in reverse order
↻ Switch off the device.
1. Unlock and open the housing door.
2. Remove the upper cover.
3. Release the DC and AC cables from the connection terminals.
4. Pull out the cables.
» The battery system is uninstalled. Continue with the disassembly.
11.3 Disassembling the device
NOTE
To disassemble, follow the same sequence as for assembly but in reverse order
↻ Switch off the device.
1. Uninstall the components.
2. Remove the fastening from the device.
3. Securely pack up the battery system if it is to be used later
or have the battery system disposed of in accordance with section 12 on page 36.
12 Disposal
For the most part, both the battery system and the corresponding transport packaging are made from recyclable
raw materials.
Batteries and components:
Do not dispose of faulty batteries or the components together with household waste. Ensure that the old device
and accessories are disposed of in a proper manner.
Packaging:
Ensure that the transport packaging is disposed of properly.
Batteries:
Used or faulty batteries must be transported in special packaging. If you need such packaging, please contact the
KACO Hotline.
NOTE
Please read the additional information in the enclosed manual "Features for the battery unit"