Invotel SX8500 - Manual (Page 7)

vii
Adjusting Output VOLUME
If the On Hold audio volume is too low turn the VOLUME control clockwise; If it is too loud turn the VOLUME
control counter clockwise to desired level.
Dual function input/output RCA jack ( 8Ω )
If the Flash card is inserted, the bigger (RCA jack) is output for external use as well as being used internally
for the adapter. To connect a speaker to this jack be sure to use a 5 inch or smaller speaker to avoid
overloading the out put beyond it’s limits. If the Flash card is removed, the built in digital player turns OFF
and this jack is used as “input” for connection to an external audio source like digital player, Radio, CD
player. PC, etc.
Manual Recording:
Connecting to an external audio source:
Connect the Audio IN jack to your audio source speaker or headphone jack using
the 3.5mm to 3.5 mm audio cord. Select the bank you want to record
1. Press REC to stop the playback, GREEN/ RED STATUS LEDs Blink ON/OFF continuously.
2. Start your music/audio, email MP3 file etc. Recording starts automatically (or you may press
REC to start recording manually if you prefer)
3. RED STATUS LED light turns ON solid to indicate recording in progress.
4. Recording stops automatically after 15 seconds of silence in the end of recording, the unit then
removes the silences and resumes playback operation. (You may also press REC to stop
recording if you prefer to control it manually). RED Status light turns OFF and Green Status will
turn ON.
Automatic Start / Stop: This feature on SX8500 allows you to just start the audio and walk
away, no need to watch the unit for end of recording.
The device automatically starts it’s normal playback, and will play what you just recorded
repeatedly. If you need to re-record repeat the above steps.
AUDIO IN
Audio source
PC, CD player...
MIC
IN
BANK
1 2
REC
P7
Optional upgrade for
user recordings
If you have SX8500-4 model you must upgrade it to
SX8500 before it can use a Flash card