Yaskawa GPD 515-G5 Modbus RTU - Manual (Page 61)

7-25 Registers
Drive Parameter Registers (Read/Write) (continued)
REGISTER PARAMETER PARAMETER PARAMETER LIMITS / DESCRIPTION INITIAL
(in hex) FUNCTION SETTING VALUE
49Ch L6-05 Torque Detection Level 2 0 to 300% 150
49Dh L6-06 Torque Detection Time 2 0.0 to 10.0 seconds 0.1
49Eh L7-01 Forward Torque Limit 0 to 300% 200
49Fh L7-02 Reverse Torque Limit 0 to 300% 200
4A0h L7-03 Forward Regenerative Torque Limit 0 to 300% 200
4A1h L7-04 Reverse Regenerative Torque Limit 0 to 300% 200
4A2-4A3h Reserved
4A4h L8-01 Internal Dynamic Braking 0 Not Provided 0
Resistor Protection 1 Provided
4A5h L8-02 oH (Overheat) Protection Alarm Level 50 to 110 o C 100
4A6h L8-03 Operation Selection after oH 0 Ramp to Stop
(Overheat) Pre-alarm 1 Coast to Stop 3
2 Fast-stop
3 Alarm Only
4A7h Reserved
4A8h L8-05 Input Open-phase Protection 0 Disabled 0
Selection 1 Enabled
4A9h Reserved
4AAh L8-07 Output Open-phase Protection 0 Disabled 0
Selection 1 Enabled
4AB-4B1h Reserved