Yaskawa AC Drive-Option BRAKING UNIT-CDBR Spec.D - Manual (Page 43)

6 Electrical Installation
YASKAWA ELECTRIC TOBP C720600 01C 1000-Series Option CDBR-†D, LKEB-† Installation Manual 43
■ Bottom Cover Wiring Space
When reattaching the covers, route the wiring between the cutouts of the covers as shown in
Figure 16 .
Note: Take proper precautions when wiring the option so that the covers will easily fit back into the
original position. Make sure cables are not pinched between the covers and the option when
replacing the covers.
Figure 16
Figure 16 Wiring Spaces
A – Wiring space for control circuit
terminals
C – Wiring space for ground terminals
B – Wiring space for LKEB braking
resistor unit
D – Wiring space for main circuit
terminals
A
B D
C
TOBP_C720600_01C_3_0_E.fm 43 ページ ２０１３年１０月７日 月曜日 午後２時２０分