Yaskawa VS-616G5 Series Revision F Quick-Start - Manual (Page 12)

12 VS-616G5 Installation & Quick-Start Manual
1.4 PRELIMINARY INSPECTION
Receiving
After unpacking the VS-616G5:
· Verify that the part numbers on the drive nameplate match the numbers on your purchase order or
packing slip.
· Check the unit for physical damage which may have occurred during shipping. If any part of the
drive is missing or damaged, notify the carrier and your Yaskawa representative immediately.
· Verify that all internal hardware (i.e. components, screws, etc.) is seated properly and fastened
securely.
· Verify that the instruction manual is included (YEA-TOA-S616-10.12).
· If the drive will be stored after receiving, place it in its original packaging and store according to
temperature specifications on page 11.
Checking the Nameplate
Identifying the Parts
MODEL :
INPUT :
OUTPUT :
CIMR-G5U43P7
SPEC :
AC 3PH
AC 3PH 0-460V 6.1kVA 8.5A
380-440V 50Hz
380-460V 60Hz
LOT NO : MASS : 4.5 kg
43P71F_
SER NO :
Mg
Inverter Model
Input Spec.
Output Spec.
Lot No.
Serial No.
Inverter Spec.
Mass
UL FILE NO : UL File No.
Figure 1 Nameplate Example of American Model CIMR-G5U43P7
10.2A
E131457
Specifications
A: Japanese specifications
C: European specifications
U: American specifications
CIMR - G5 U 4 3P7 1 F
Inverter
VS-616G5 Series
Revision symbol
Model Designation
0P4 to 300
See Specifications page 9.
Voltage Class
2: 3-phase, 230V
4: 3-phase, 460V
5: 3-phase, 575V
Enclosure
0: Open chassis
1: NEMA 1 (IP20)
Figure 2 Nameplate Description
Figure 3 Parts Identification - Model CIMR-G5U43P7
Protective Cover (top/bottom)
Front Cover
4 Mounting Holes
Digital Operator
JVOP-130U
Heatsink
Nameplate
Ventilation Slots
Chapter 1 - Receiving & Installation
Preliminary Inspection