Yaskawa Modicon 800 Series Remote I/O Network for use on Microtrac LAN - Manual (Page 19)

4 OPERATION
18 Operation
5/24/96
OPERATION
M i c r o Tr a c
N e t w o r k
Interface Card
Modicon I/O
Interface Card
M i c r o Trac Hub
Card (optional)
LEDs CR1
green MicroTrac LAN has connection with the card
red gateway software has made connection with the card
indicates if
off
card is loaded with software
LED1
green card is (normal)
LEDs loaded with
on
card needs to be loaded with
software software
LED2 red
power off no power to gateway
indicator on power on gateway (normal)
CR1 bnc1 MicroTrac LAN port is active
(red) (used either as the input or one of the outputs)
CR2 bnc2 MicroTrac LAN port is active
(red) (used either as the input or one of the outputs)
LEDs CR3 bnc3 MicroTrac LAN port is active
(red) (used either as the input or one of the outputs)
CR4 bnc4 MicroTrac LAN port is active
(red) (used either as the input or one of the outputs)
CR5 signals reconfigure on the MicroTrac LAN
(yellow) (light on reconfigure)
CR6 LAN timing light – usually on
(red) (if off, problem with LAN timing)
RD 3004-20