Appendix 3- parameter cross reference, Parameter name, Description or selection – Yaskawa GPD506/P5 to P7 User Manual
Page 31
Appendix 3- Parameter Cross Reference
Page
31
of 48
GPD506/P5 Parameter
P7 Parameter
Param
No.
Nxxx
Parameter
Name
Description or Selection
Description or Selection
Parameter
Name
Param.
No.
010
V/f pattern selection
1: Fixed V/f pattern
0: Adjustible V/f pattern
(Constant n011-n017 can be set)
There are 15 different preset V/F patterns
to select from (E1-03 = 0 to E) with
varying voltage profiles, base levels (base
level = frequency at which maximum
voltage is reached), and maximum
frequencies. There are also settings for
Custom V/F patterns that will use the
settings of parameters E1-04 through E1-
13. E1-03 = F selects a custom V/F pattern
with an upper voltage limit and E1-03 = FF
selects a custom V/F pattern without an
upper voltage limit.
0: 50
Hz
1: 60
Hz
2:
60Hz (50 Hz Base)
3:
72 Hz (60 Hz Base)
4:
50 Hz VT1
5:
50 Hz VT2
6:
60 Hz VT1
7:
60 Hz VT2
8:
50 Hz HST1
9:
50 Hz HST2
A:
60 Hz HST1
B:
60 Hz HST2
C:
90 Hz (60Hz Base)
D:
120 Hz (60Hz Base)
E:
180 Hz (60Hz Base)
F: Custom
V/F
FF:
Custom w/o limit
V/F Pattern Selection
E1-03
011
Max. output frequency
Set unit: 0.1Hz and set range: 50.0-400.0Hz
0.0 to 120.0
Maximum Output Frequency
E1-04
012
Maximum voltage
Set unit: 0.1V and set ranges: 0.1-733.1V
0 to 255.0 (240V), 0 to 510.0(480V)
Maximum Output Voltage
E1-05
013
Base Frequency
Set unit: 0.1Hz and set range: 0.2-400.0Hz
0.0 to 200.0
Base Frequency
E1-06
014
Mid Freq output
Set unit: 0.1Hz and set range: 0.1-399.9Hz
0.0 to 200.0
Mid Output Frequency A
E1-07
015
Mid Freq. voltage
Set unit: 0.1V and set ranges: 0.1-733.1V
0 to 255.0 (240V, ) 0 to 510.0 (480V)
Mid Output Voltage A
E1-08
016
Min output frequency
Set unit: 0.1Hz and set range: 0.1-10.0Hz
0.0 to 200.0
Minimum Output Frequency
E1-09
017
Min output voltage
Set unit: 0.1V and set ranges: 0.1-143.7V
0 to 255.0 (240V), 0 to 510.0 (480V)
Minimum Output Voltage
E1-10
018
Acceleration time 1
Set unit: 0.1sec (1sec in 1000sec or more)
Set range: 0 to 3600sec
Acceleration Time 1
C1-01
019
Deceleration time 1
Set unit: 0.1sec (1sec in 1000sec or more)
Set range: 0.to 3600sec
Deceleration Time 1
C1-02
020
Acceleration time 2
Set unit: 1sec and set range: 0-255sec
Acceleration Time 2
C1-03
021
Deceleration time 2
Set unit: 1sec and set range: 0-255sec
0.0 to 6000.0
Deceleration Time 2
C1-04
S-Curve Characteristic at
Accel Start
C2-01
S-Curve Characteristic at
Accel End
C2-02
022
S curve selection
0: No S curve
1 : 0.2sec
2 : 0.5sec
3 : 1.0sec
0.00 to 2.50