Epson PhotoPC 750Z User Manual

Page 44

5-6

Depending on the type of cable you have, line up either
the arrow or the flat side of the cable connector with

the mark on the camera’s serial port. Then insert the
connector.

Turn on the camera and your computer system.

NOTE

If you have problems connecting to the COM port you have

selected, check your computer’s COM port configuration and

try again. See page 5-11 for more tips on connecting your camera

and getting the computer to see it.

Connecting to a Macintosh

Make sure you have the Macintosh/Direct Print cable that
came with your camera. Before you start, turn off the camera

and your Macintosh.

Locate the modem port

or printer port

the back of your Macintosh. You can use either port to
connect the camera.

NOTE

If you are sharing a serial port that you use for another

device, make sure AppleTalk



is turned off. Your Macintosh

may not recognize the camera if AppleTalk is on. Also, if you

have problems connecting to the printer port, use the

modem port instead. See page 5-11 for more tips on

connecting your camera and getting the computer to see it.

GetStart.book Page 6 Tuesday, March 2, 1999 5:13 PM