beautypg.com

Epson PhotoPC 750Z User Manual

Page 11

background image

1-5

A

B

1

Follow these steps to charge your batteries for the first time:

1

Lift up the cover of the charger and insert all four

batteries, positioning the + and – ends as shown. Then
close the cover firmly.

2

Turn the charger over and flip the two prongs out of
their compartment.

3

Plug the charger into an electrical outlet. Both lights
turn red, indicating that the charger is working. When
the batteries are charged, after about two and a half
hours, the lights go off.

NOTE

The charger lights flash to indicate changes in battery

temperature and voltage. If the lights continue to flash for

more than half an hour, the batteries may be damaged or

worn out, and should be replaced. Unplug the charger if the

batteries are not fully charged after four hours.

+

+

+

+

GetStart.book Page 5 Tuesday, March 2, 1999 5:13 PM