Epson PhotoPC 750Z - Manual (Page 25)

3-5
A
B
3
2 Insert your memory card and slide it all the way into the
slot.
3 Close the memory card cover.
Next, you need to format the card. Follow the steps below.
Formatting Your Memory Card
You should format your card before you use it. Follow these
steps:
1 Set the camera dial to Play. If you haven’t used the
memory card, you may see the following message:
This applies to the memory card only, and does not
indicate whether you have photos in the camera’s
internal memory.
2 Press the SEL button to display the LCD screen menus.
3 Press the or button until you see the Photo
Control menu . Then press the SEL button to
display the menu options, as shown below:
4 Press the or button until Format Card is
highlighted.
5 Press the SEL button. A message appears stating that all
data on the card will be erased and asking you to
confirm the procedure.
GetStart.book Page 5 Tuesday, March 2, 1999 5:13 PM