Epson PhotoPC 750Z - Manual (Page 23)

3-3
A
B
3
You see a message asking you to set the language and
then you see the language setting screen:
2 Press the ESC button to choose English.
You see a message asking you to set the clock.
3 Press the SEL button.
You see the clock setting screen, with the year setting
highlighted in red:
4 If necessary, press the button to increase the
number or the button to decrease the number,
until the year is correct.
5 Press the SEL button. The year setting is saved and the
month setting is highlighted.
6 Adjust the month, day, hour, minute, and date format
settings as described above until they are correctly
adjusted and saved.
After you finish setting the clock and press the SEL
button, your screen returns to view mode.
7 Turn the camera dial Off.
NOTE
You need to set the clock each time you replace the batteries.
The camera does not keep the date and time without battery
power.
GetStart.book Page 3 Tuesday, March 2, 1999 5:13 PM