Epson PhotoPC 750Z - Manual (Page 36)

4-4
Forced Flash
The flash goes off with every picture you take. Use this
setting to compensate for backlighting; for example,
when you are facing a light source.
Flash Off
The flash is disabled, even when adequate lighting is
not available. Use this setting for special effects,
where flash photography is prohibited, or for macro mode
close-ups.
After you take a flash picture, the icon blinks until the flash is
fully recharged. Your flash setting remains in effect even after
you turn off the camera.
TIP
When you are using the flash off setting, hold the camera steady
to avoid capturing blurry images.
When you’re taking pictures outdoors, make sure the sun is at
your back. In very bright light (at the beach or in snow, for
example), your pictures may come out too light. You can use the
manual exposure setting to darken an image before you capture
it. See page 1-14 in your User’s Guide for instructions.
Alternatively, you can use Image Expert or other image editing
software to correct over-exposure problems after you take the
picture.
When you’re taking pictures at night, you can use the slow
synchronized flash mode to light up the background as well as
your subject. See page 1-17 in your User’s Guide for details.
GetStart.book Page 4 Tuesday, March 2, 1999 5:13 PM