SMA SC 500CP XT Installation - Manual (Page 18)

4.3.2 Transporting the Inverter Using a Forklift or a Crane Fork
1. Disassemble the panels (see Section 7.2.1, page 40).
2. If a crane fork is used, move the forks of the crane fork under
the inverter from the front or the back. Take the center of
gravity of the inverter into account and move the crane fork
completely under the inverter.
3. If a forklift is used, move the forks of the forklift under the
inverter from the front or the back. Take the center of gravity of
the inverter into account and move the forklift completely under
the inverter.
4. Secure the inverter, e.g., with harness, to prevent it from tipping over.
5. Slightly raise the inverter.
6. Transport the inverter to the mounting location and set it down on a suitable surface.
4.3.3 Transporting the Inverter Using a Crane
In order to transport the inverter with a crane, the roof must be disassembled.
Danger of crushing due to heavy, unwieldy roof
The inverter roof is heavy and bulky. If you try to move the roof on your own, you run a risk of having limbs crushed.
Weight of the roof: 30 kg.
• Wear suitable personal protective equipment for all work on the product.
• Always have two persons disassemble and mount the roof.
4 Transport and Mounting SMA Solar Technology AG
Operating Manual SCCPXT-IA-E4-en-44 18