SMA Webconnect Systems in SUNNY PORTAL - Manual (Page 54)

9 System Management SMA Solar Technology AG
54 SPortalWebcon-BA-en-13 User Manual
13. Select [Next].
☑ A summary is displayed.
14. Select [Finish].
9.3 Deactivating/Activating the Inverters
In the following cases, you must deactivate inverters in Sunny Portal:
• You have removed an inverter with integrated or retrofitted Webconnect function from your
system.
or
• You no longer wish to display an inverter in Sunny Portal.
The data of the deactivated inverter is retained in Sunny Portal.
Requirement:
☐ You must have the user role Installer or Administrator (see Section 10.1 "User Roles and
User Rights in Sunny Portal", page 56).
Procedure:
1. Call up the inverter properties (see Section 8.1 "Calling up the Device Properties", page 48).
2. Select [Edit].
☑ The menu for setting the device properties opens.
3. To deactivate the inverter in Sunny Portal, deactivate the checkbox active in the area
Data Collection.
4. To activate the inverter in Sunny Portal, activate the checkbox active in the area
Data Collection.
5. Select [Save].
9.4 Deleting Inverters
Requirement:
☐ You must have the user role Installer or Administrator (see Section 10.1 "User Roles and
User Rights in Sunny Portal", page 56).
Inverter data is irretrievably deleted
If you delete the inverter, all the data of that inverter will be irretrievably deleted from
Sunny Portal. The data will be retained in the memory of the inverter. The amount of data
depends on the size of the inverter memory.
• Check whether it is sufficient to deactivate the inverter (see Section 9.3 "Deactivating/
Activating the Inverters", page 54).