SMA Webconnect Systems in SUNNY PORTAL - Manual (Page 11)

SMA Solar Technology AG 3 Getting Started
User Manual SPortalWebcon-BA-en-13 11
4. Select [Next].
☑ The page Select devices opens.
5. Enter the PIC and RID of an inverter in your system in the PIC and RID fields (for PIC and RID,
see inverter type label or sticker near the type label).
6. Select [Identify].
☑ The PV System Setup Assistant establishes a connection to the inverters and then adopts the
data entered without displaying an error message.
✖ Is an error message displayed?
• Rectify the error as stated in the error message.
7. To add up to three more inverters, enter the PIC and RID for each additional inverter and select
[Identify]. A Webconnect system can consist of up to four inverters. To add more inverters,
create another Webconnect system after completion of the registration.
8. Select [Next].
☑ The page Extended PV System Properties opens.
9. Enter the system properties.
10. Select [Next].
☑ The PV System Setup Assistant shows a summary of your entered data.
11. Select [Finish].
☑ Sunny Portal configures your Sunny Portal system.
12. To switch to the Sunny Portal system, select [To the PV system]
☑ Your Webconnect system in Sunny Portal opens.
3.2 Logging In and Out of Sunny Portal
Logging into Sunny Portal
Requirement:
☐ You must already be registered in Sunny Portal.
Procedure:
1. Go to www.SunnyPortal.com.
2. In the Login area, enter your e-mail address in the field E-mail.
3. Enter the Sunny Portal password in the field Password.
4. Activate the SSL checkbox to transmit the encrypted login data.
5. Activate the Remain logged in checkbox to stay logged in for your next Sunny Portal visits.
This means that you will remain logged into Sunny Portal until you actively log out.
6. Select [Login].