SMA Webconnect Systems in SUNNY PORTAL - Manual (Page 40)

7 System Settings SMA Solar Technology AG
40 SPortalWebcon-BA-en-13 User Manual
7.3 Changing the System Name
You can change the system name entered during system registration.
Requirement:
☐ You must have the user role Installer or Administrator (see Section 10.1 "User Roles and
User Rights in Sunny Portal", page 56).
System name requirement:
☐ The system name can have a maximum of 30 characters.
Procedure:
1. Select Configuration > PV System Properties in the page and menu selection.
2. Select the tab PV System Data.
3. Select [Edit].
☑ The menu for setting PV system data opens.
4. In the field Name, enter the desired system name.
5. Select [Save].
7.4 Setting the Nominal System Power
7.4.1 Manual Entry of Nominal System Power
The PV system power is the aggregate maximum power of all PV modules. You can obtain the nominal
PV system power specifications from your installer.
The nominal PV system power is required in order to display the following data:
• Specific PV system yield
• Average expected yield
Requirement:
☐ You must have the user role Installer or Administrator (see Section 10.1 "User Roles and
User Rights in Sunny Portal", page 56).
Procedure:
1. Select Configuration > PV System Properties in the page and menu selection.
2. Select the tab PV System Data.
3. Select [Edit].
☑ The menu for setting PV system data opens.
4. In the field PV System Power in the Power area, enter the system power.
5. To set the manufacturer of the PV modules, select the manufacturer in the drop-down list
Manufacturer.
6. To set the module types, select the module types in the drop-down list Module Type.
7. Select [Save].