HEIDENHAIN PWM 20 - Manual (Page 62)

August 2014 Pin layouts 63
4 Pin layouts
4.1 Pin layout of PWM 20
The signal assignment of the PWM 20 encoder input (X1) and output (X2) is determined
by the encoder connected.
If an EnDat encoder is connected and identified, the pin assignment of the EnDat interface
is active; if it is a 1 Vpp encoder, it is the pin assignment of the 1 Vpp interface.
For the assignments of the PWM 20, refer to the Installation and Commissioning
Instructions ID 729905-xx (supplied with the PWM 20 basic kit).
Note
Pin layout of PWM 20: See Installation and Commissioning Instructions, ID 729905-xx.