HEIDENHAIN TNC 640 (34059x-05) ISO programming - Manual (Page 626)

Tables and overviews
19.3 Technical Information
19
626
TNC 640 | User's ManualDIN/ISO Programming | 1/2015
User functions
Teach-In
■ Actual positions can be transferred directly into the NC program
■ Graphic simulation before program run, even while another program is
being run
Program verification graphics
Display modes
■ Plan view / projection in 3 planes / 3-D view / 3-D line graphic
■ Magnification of details
Programming graphics
■ In the Programming mode, the contour of the NC blocks is drawn on
screen while they are being entered (2-D pencil-trace graphics), even
while another program is running
Program-run graphics
Display modes
■ Graphic simulation of real-time machining in plan view / projection in 3
planes / 3-D view
Machining time
■ Calculating the machining time in the Test Run mode of operation
■ Display of the current machining time in the Program Run operating
modes
Contour, returning to
■ Mid-program startup in any block in the program, returning the tool to
the calculated nominal position to continue machining
■ Program interruption, contour departure and return
Datum tables
■ Multiple datum tables, for storing workpiece-related datums
■ Calibrating the touch probe
■ Compensation of workpiece misalignment, manual or automatic
■ Datum setting, manual or automatic
■ Automatically measuring workpieces
Touch probe cycles
■ Cycles for automatic tool measurement
■ Cycles for automatic kinematics measurement