HEIDENHAIN TNC 640 (34059x-05) ISO programming - Manual (Page 592)

MOD functions
18.10 Setting up data interfaces
18
592
TNC 640 | User's ManualDIN/ISO Programming | 1/2015
Setting the operating mode of the external device
(fileSystem)
The functions "Transfer all files," "Transfer selected
file," and "Transfer directory" are not available in the
FE2 and FEX modes.
Icon External device Operating
mode
PC with HEIDENHAIN TNCremo data
transfer software
LSV2
HEIDENHAIN floppy disk units FE1
Non-HEIDENHAIN devices such as
printers, scanners, punchers, PC
without TNCremo
FEX
Data transfer software
For transfer of files to and from the TNC, we recommend using the
HEIDENHAIN TNCremo data transfer software. With TNCremo,
data transfer is possible with all HEIDENHAIN controls via the serial
interface or the Ethernet interface.
You can download the current version of TNCremo
free of charge from the HEIDENHAIN Filebase
(www.heidenhain.de,
Information>, , ,
Software>, ).
System requirements for TNCremo:
PC with 486 processor or higher
Windows XP, Windows Vista, Windows 7, Windows 8 operating
system
16 MB RAM
5 MB free memory space on your hard disk
An available serial interface or connection to the TCP/IP network
Installation under Windows
Start the SETUP.EXE installation program with the file manager
(Explorer)
Follow the setup program instructions
Starting TNCremo under Windows
Click on , , ,
When you start TNCremo for the first time, TNCremo automatically
tries to set up a connection with the TNC.