HEIDENHAIN iTNC 530 (340 49x-06) ISO programming - Manual (Page 624)

624 iTNC 530 with Windows XP (Option)
1
9
.5 Specifics About File Manag
e
ment
19.5 Specifics About File
Management
The iTNC drive
When you call the iTNC file manager, the left window shows all
available drives. For example:
„ C:\ : Windows partition of the built-in hard disk
„ RS232:\ : Serial interface 1
„ RS422:\ : Serial interface 2
„ TNC:\ : Data partition of the iTNC
There might also be other networks available if you have connected
them with Windows Explorer.
If you connect a new network drive with Windows Explorer, you may
have to update the iTNC’s display of available drives:
U Press the PGM MGT key to call the file manager.
U Move the highlight to the drive window at left.
U Switch to the second level of the soft-key row.
U To update the drive overview, press the UPDATE TREE soft key.
Please note that the data drive of the iTNC appears in the
file manager with the name TNC:\. In Windows Explorer,
this drive (partition) appears with the letter D.
Subdirectories on the TNC drive (e.g. RECYCLER and SYSTEM
VOLUME IDENTIFIER
) are created by Windows XP and may
not be deleted.
With MP7225 you can define letters of drives that should
not be shown in the file management of the TNC.