Ericsson G36 - Manual (Page 69)

Fixed Wireless Terminal: G32 & G36 69
Battery
The FWT can be installed with a backup battery:
• Rechargeable lead-acid battery: 6V, 1.2-1.3 Ah with 2.5 hours con-
tinuous conversation, 13.5 hours stand-by.
Warning: Ericsson recommends precaution when handling lead-acid
batteries, and also special attention over storage and power loss
issues. Please refer to the topic Product Care and Safety docu-
mented on page 71 for more detailed information.
Note: only an Ericsson approved battery must be used (part number
BKB 201 005).
Battery Cable
The battery cable is used to connect the backup battery to the FWT.
DC/DC Power Converter
This accessory can be used to connect a DC voltage power system (car
battery, solar cell, etc.) to feed the FWT. DC Input: 10-32 VDC.
USB Cable
The USB cable can be used to connect the FWT to a PC, in which case
the FWT acts as a modem for data transmission. This allows you to use
the FWT for SMS, fax and data services. To send/receive SMS or faxes
via the terminal a 3
rd party application is required.
USB to RS232 Adapter
For PCs that do not have a USB port this USB-to-RS232 adaptor con-
verts a standard serial port to a USB port. This can be used in conjunc-
tion with the USB cable to connect a PC and the FWT.
Mechanical Antitheft Lock
The mechanical lock serves as an anti-theft device. It fits into the wall
mounting bracket; the FWT is then installed onto the wall mounting
bracket as normal. The mechanical lock prevents removal of the FWT