Ericsson G36 - Manual (Page 55)

Fixed Wireless Terminal: G32 & G36 55
Web-based Configuration
This chapter describes the interface and user settings (volume, ringing
signals, dial speed setups etc) that are available and the procedures for
the use of your PCs standard modem to make data calls (Internet
browsing, e-mail, etc.) through the FWT line interface. To be able to
send and receive data calls, you need:
• A PC equipped with an analog modem and the appropriate com-
puter program (Web Browser, E-mail, etc).
• A SIM card that supports data transmission over the GSM network.
Note: If you do not have a modem in your PC, the FWT can be
configured to act as a modem. Please refer to the topic
Connect-
ing PCs documented on page 21 for more detailed information.
To be able to access the User Interface settings the following steps
must be followed:
• Open your Web Browser on your PC, and type the following default
URL:
http://192.168.1.1/default.asp
• The following configuration page will be displayed.
Note: Use PDP context 6 to access the web-based configuration
pages on the FWT, e.g. *98*06#.