Ericsson G36 - Manual (Page 62)

62
Fixed Wireless Terminal: G32 & G36
The Power LED (red and green) indicates the FWT power supply status:
When both LEDs are flashing simultaneously flashing simultaneously flashing simultaneously flashing simultaneously, it means that the FWT is
under alarm conditions alarm conditions alarm conditions alarm conditions. In this situation, ONLY EMERGENCY CALLS
can be made.
The following table summarizes the different operating status of your
FWT depending on the LEDs, and what to do if a problem is encoun-
tered. If the problem persists, please contact your distributor or network
operator.
Color Power supply situation
Green Power supply in ON (AC adapter)
Red The FWT is powered from the battery back-up
OFF Power is OFF
Simultaneously flashing Alarm status Do this ...
1 flash synchronised
Power LED - - -
Radio LED - - -
ENTER PIN
Insert the correct PIN. Please refer
to the topic
Enter PIN on page 11.
ENTER PUK Insert the correct PUK
INSERT SIM Insert the SIM card in the FWT.
SIM ERROR
SIM failure. Check the SIM or
contact your network operator.
WRONG NETWORK
WRONG
SUBNETWORK
The FWT is SIM-locked to a specific
network and the inserted SIM card
does not correspond to this
network. Check the SIM or contact
your network operator.
WRONG SIM
The FWT is PIN-locked and can
only be used with one SIM card.
Introduce the original SIM or
contact your network operator.
FWT LOCKED
The FWT lock function is enabled.
Contact your distributor or network
operator.
WRONG XXXCK
(where XXX is the
name of the specific
password) The FWT is blocked due to
incorrect password entry. Contact
your distributor or network
operator.
3 flashes synchronised
Power LED - - - - - - - - -
Radio LED - - - - - - - - -
FWT FAILURE
Check connections of the FWT or
contact your distributor/ network
operator.
2 flashes synchronised
Power LED - - - - - -
Radio LED - - - - - -