Ericsson G36 User Manual
Page 10
10
Fixed Wireless Terminal: G32 & G36
2.
Remove the front cover, by pressing down and pushing the small
tab that is in the center of the bottom part of the FWT. Open the
SIM Card holder and insert the SIM Card.
3.
Close the SIM Card holder, placing it horizontally and securing it
with the sliding part of the holder.
4.
Install the battery (optional) in the battery compartment (over the
SIM Card). To do so, connect the battery cable to the FWT connec-
tor. Connect the black cable to the negative pole (-) of the battery
and the red cable to the positive pole (+). Fit the cable under the
holding tab (over the SIM Card) and insert the battery until the tab
fixates it.
5.
Replace the front cover.
Connecting a telephone to the FWT
Connect an analog telephone to the line interface (RJ11) of the FWT.
Important: You may have to use this telephone to enter the PIN
code.