Ericsson G36 - Manual (Page 20)

20
Fixed Wireless Terminal: G32 & G36
Routing (LCR) programmed PBX. Once LCR is programmed, make a
call to a mobile telephone number. See if the call is established through
the FWT and check the speech quality.
If the PBX does not offer the LCR option, choose the FWT trunk manu-
ally with a specific prefix. Check the installation in the same way as be-
fore. If you encounter problems, contact your distributor or network
operator.
Warning: The PBX may require specific programming: both pro-
gramming and installation should be done by specialized service
personnel.
Using telephones
Telephones connected to the FWT work in the same way as if they were
connected to a fixed line network.
Warning: You will not be able to make or receive data or fax calls
while a speech call is ongoing.
Note: You can also benefit from some GSM functionality that you
usually do not have in the fixed line network. Please refer to the
topic
Advanced Features documented on page 24 for more de-
tailed information.
Please refer to the topic
Audible Tones documented on page 64 for
more detailed information.
Using fax machines
The FWT allows the connection of Group 3 analog fax machines to the
telephone line interface, in the same way as a telephone.
Note: The fax communication service has to be registered with
your network operator. Otherwise, the network will not allow
faxes to be sent or received.
Note: You will not be able to make or receive other calls while a
fax communication is established.
Sending a fax
The FWT is programmed to automatically detect outgoing calls made by
an analog fax, meaning that the user simply has to use the fax in the
same way as a conventional telephone line.
Warning: If your fax is an old model and is not able to send the
fax identification, CNG tone, you should include *01* before the