HEIDENHAIN ND 730 v.1 - Manual (Page 31)

32
P41.1 to P41.3 Linear axis error compensation
Linear axis error compensation is activated via parameters
40.1 to 40.3.
Input range
[µm] : – 99999 to + 99999
Default setting: 0
Example: Displayed length La = 620.000 mm
Actual length (as determined for example with
the VM 101 from HEIDENHAIN)
La = 619.876 mm
Difference
∆
L = La – Ld = –124 µm
Compensation factor k:
k =
∆
L/Ld = –124 µm/0.62 m = –200 [µm/m]
P43.1 to P43.3 Reference marks
One reference mark SINGLE REF.
Distance-coded with 500 • SP 500 SP
Distance-coded with 1000 • SP 1000 SP
Distance-coded with 2000 • SP 2000 SP
Distance-coded with 5000 • SP 5000 SP
(SP = signal period)
P44.1 to P44.3 Reference mark evaluation
Evaluation active REF. X ON
Evaluation not active REF. X OFF
P45.1 to P45.3 Encoder monitoring
Amplitude and frequency
monitoring active
ALARM ON
Amplitude and frequency
monitoring not active
ALARM OFF
P48.1 to P48.3 Activate axis display
Axis display active AXIS ON
Axis display not active AXIS OFF
P80 Function of CL key
Reset with CL CL...RESET
No reset with CL CL......OFF
P98 Dialog language 1)
German LANGUAGE D
English LANGUAGE GB
French LANGUAGE F
Italian LANGUAGE I
Dutch LANGUAGE NL
Spanish LANGUAGE E
Danish LANGUAGE DK
Swedish LANGUAGE S
Finnish LANGUAGE FI
Czech LANGUAGE CZ
Polish LANGUAGE PL
Hungarian LANGUAGE H
Portuguese LANGUAGE P
Operating Parameters
1) User parameter