HEIDENHAIN ND 730 v.1 - Manual (Page 20)

20
Taper Calculator
3
1
TAP. RATIO
Confirm function.
1. VALUE
Enter the first value, e.g. 1, and confirm with ENT
2. VALUE
Enter the second value, e.g. 3, confirm with ENT
(length of taper is three times as large as radius
difference).
ANGLE = 18.435
The result is displayed in the message field.
End the taper calculator.
You can change entered values later by selecting them with
the ENT key or the TOOL key.
ENT
ENT
ENT
SPEC
FCT
or