Adjusting the loading position – Epson 1170 User Manual

Page 70

Micro Feed

While holding down the ALT button, press the LOAD/EJECT

button to feed the paper forward or press the LF/FF button to

feed the paper backward, as indicated by the arrows above the

buttons.

Adjusting the loading position

The loading position is the position of the paper after it is

automatically loaded by the printer. If your printing is too high or

low on the page, you can change the loading position with the

micro-feed feature as follows:

1. Make sure the printer is turned on.

Load either continuous or single-sheet paper (load continuous

paper by pressing the LOAD/EJECT button). The MULTI-PART

light begins to blink.

Note: You

can adjust the loading position only while the MULTI-

PART

light is blinking.

3-14

Using the Printer