Removing continuous paper from the pull-tractor – Epson 1170 User Manual

Page 49

Using continuous Paper

Adjusting the top-of-form position

The top-of-form position is the position the printer feeds the

paper to when it loads the paper or performs a form feed. This

position is important because it determines where the printing

begins on the page.

You may need to adjust the top of form to a certain position for

printing on ready-made forms. To do this, see Adjusting the

loading position on page 3-14.

Removing continuous paper from the pull tractor

Tear off the printed document or excess paper at the tear-off

edge.

2. Hold the LF/FF button to feed the continuous paper forward to

be ejected.

Note:

When you are printing with the pull tractor, do not use

the TEAR OFF and LOAD/EJECT buttons.

Paper Handling

2-21