Epson 1170 - Manual (Page 52)

Switching Between Continuous and Single Sheets
Switching to continuous paper
You can also easily switch back to printing on continuous paper.
1.
2.
3.
If you have a single sheet still in the printer, press the
LOAD/EJECT button to eject it.
Lift up slightly on the paper guide and then lower it until it
lies flat on top of the printer. Slide the left and right edge
guides together so that they meet at the middle.
Set the paper-release lever to either the front or rear push-
tractor position, depending on which tractor position you are
using.
Your printer loads the continuous paper automatically.
2 - 2 4
Paper Handling