Epson 1170 - Manual (Page 107)

Printing
l
The font selected by the control panel does not print.
Your software may be overriding your panel setting. Check
the font setting in your application program.
l
The wrong characters are printed.
The wrong character table or the wrong international
character set may be selected. Check the DIP-switch
settings. See page 3-8.
The print position is not what you expected.
l
Printing starts too high or too low on the page.
Adjust the top margin set by your application software.
Use Micro-feed to adjust the print position.
l
All the text is printed on the same line.
Set DIP switch 2-4 on so that the printer automatically
adds a line-feed code to each carriage return.
The text is printed with an extra blank line in between.
Two line-feed signals are being sent. Set DIP switch 2-4
off.
l
The page length does not match the length of your
continuous paper.
Change the page-length setting with DIP switches 2-1 and
2-2. See page 3-8.
Check the page length set by your application software and
adjust it if necessary.
6-6 Troubleshooting