Changing tractor positions – Epson 1170 User Manual
Page 37
Using Continuous Paper
Note:
Make sure you align your paper supply with the paper
loaded in the tractor so that the paper can feed smoothly into
the printer.
If you want to feed paper through the bottom paper slot, use a
printer stand that has a large enough opening for paper to feed
from the bottom without obstruction.
Using the paper-path guide
You can lift the paper-path guide on the printer cover to change
the direction that continuous paper is ejected, as shown below.
Forward ejection
Rear ejection
Changing tractor positions
Before installing the tractor in a different position, remove it from
its current position by pressing the lock tabs while you lift it out.
Installing in the front push-tractor position
1.
Make sure the printer is turned off. Open the front cover and
remove the paper guide by grasping the fins on both sides and
pulling it straight out of the printer.
Paper Handling 2-9
- Stylus Pro 7800 (11 pages)
- Stylus Pro 4000 (49 pages)
- Stylus Photo R300 (2 pages)
- Stylus Pro 7000 (147 pages)
- AcuLaser C3000 (316 pages)
- Stylus Pro 7900 (24 pages)
- Stylus Pro 4450 (21 pages)
- 1000 (272 pages)
- T034120 (4 pages)
- T580300 (4 pages)
- 300 (91 pages)
- B 510DN (190 pages)
- B 510DN (218 pages)
- Stylus NX510 (8 pages)
- Stylus Photo RX580 (95 pages)
- T549300 (4 pages)
- AculaserCX11NF (5 pages)
- B 500DN (168 pages)
- 480SXU (24 pages)
- 4500 (317 pages)
- STYLUS RX500 (99 pages)
- 2100 (13 pages)
- Stylus NX215 (2 pages)
- T098320 (4 pages)
- T041020 (4 pages)
- R210 (8 pages)
- All-In-One Stylus Photo RX600 (164 pages)
- 777I (53 pages)
- T033120 (4 pages)
- Stylus CX7000F (8 pages)
- 60 (113 pages)
- T034220 (4 pages)
- WorkForce 40 Series (36 pages)
- T054220 (4 pages)
- Stylus CX3200 (11 pages)
- Stylus CX7800 (18 pages)
- T060220 (4 pages)
- 2500 (180 pages)
- AcuLaser CX11N (32 pages)
- AcuLaser CX11N (4 pages)
- 2000P (16 pages)
- T606600 (4 pages)
- Stylus CX6000 (18 pages)
- FS-4000DN (2 pages)
- MSDS T544700 (4 pages)