Operation, Driving through water – Polaris 2013 BRUTUS Owner's Manual User Manual
Page 58
57
OPERATION
Driving Through Water
Your POLARIS BRUTUS can operate through water up to a
maximum recommended depth equal to the floorboards.
NOTICE: Driving through water deeper than the floorboards will
cause engine damage and will also void the engine
warranty.
NOTICE: Immersion can result in major damage if the vehicle isn't
serviced correctly and promptly. After immersion, always
take the vehicle to a your dealer for service. Do not start
the engine! If it's impossible to bring the vehicle to your
dealer before starting the engine, perform the service
outlined on page 93, and take the vehicle to your dealer at
the first opportunity.
Tip: For model HD and HD
PTO
; It is not recommended to drive
through water with an attachment installed.
Follow these pro-
cedures when
operating through
water:
1. Determine
water depths
and current
before enter-
ing water.
2. Choose a crossing where both banks have gradual inclines.
3. Proceed slowly, avoiding rocks and obstacles.
4. Avoid operating through deep or fast-flowing water.
WARNING! The large tires on your BRUTUS may cause the vehicle
to float in deep or fast-flowing water, which could result in loss of
control and lead to serious injury or death. Never cross deep or fast-
flowing water with your BRUTUS.
5. After leaving water, always dry the brakes by applying
light pressure to the pedal repeatedly until braking action
is normal.
NOTICE: After operating the vehicle in water, it's critical that you
perform the services outlined in the Periodic Maintenance
Chart beginning on page 77. Give special attention to
engine oil, transmission oil, all gearcase fluids and all
grease fittings.
Floorboard