Operation, Pre-ride inspection – Polaris 2013 BRUTUS Owner's Manual User Manual
Page 36
35
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating increases the risk of an accident.
Always inspect the vehicle before each use to make sure it's in safe operating condition.
Item
Remarks
Page
Brake system/pedal travel
Ensure proper operation.
Brake fluid
Ensure proper level.
Front and Rear suspension
Inspect, lubricate if necessary.
Seat Belts
Check length of belt for damage, check latches for proper operation.
ROPS/OPS
Check condition of ROPS/OPS and mounting hardware.
Steering
Ensure free operation.
Tires/wheels/fasteners
Inspect condition and pressure. Inspect, ensure fastener tightness.
Safety Signs (Decals)
Check for damaged or missing signs (decals). Replace any signs that are damaged or missing.
Frame nuts, bolts, fasteners
Inspect, ensure tightness.
-
Fuel and oil
Ensure proper levels.
Coolant level
Ensure proper level.
Coolant hoses
Inspect for leaks.
-
Travel Control Pedal
Ensure proper operation.
Indicator lights/switches
Ensure operation.
Air filter, pre-filter
Inspect, clean and replace as needed.
PTO (If Equipped)
Inspect splines, guards, shields and hardware, ensure tightness, replace damaged parts.
Brake light/tail lamp /Headlamp
Check operation, apply POLARIS dielectric grease when lamp is replaced.
102, 114
Heater/Air Conditioning Filter
Clean and replace filter as needed during heating and cooling season.