Polaris 2013 BRUTUS Owner's Manual - Manual (Page 98)

97
MAINTENANCE
Hydraulic/Hydrostatic System
Checking Fluid
WARNING!
Avoid Injury Or Death.
Always clean up spilled fuel or oil. Keep heat, flames, sparks or
lighted tobacco away from fuel and oil. Failure to use care around
combustibles can cause explosion or fire.
Use only recommended fluid in the hydraulic system.
Park the utility vehicle on
a flat level surface, lower
the attachment arm and
put the attachment flat on
the ground. See page 44.
Move the gear selector
lever to Park, stop the
engine and exit the utility
vehicle. See page 41.
Raise the cargo box. See
page 62.
Check the fluid level in
the sight gauge. The fluid
level is correct when at
the center of the sight gauge.
Use only recommended Polaris hydraulic fluid when adding or
changing the hydraulic fluid. See page 128.
Adding Fluid
Clean the area around the fill cap.
If needed, remove the fill/breather cap and add fluid.
Lower the cargo box. See page 62.
Sight Gauge Fill Cap